Parts for Industrial Scissor Lifts

Industrial Scissor Lift Parts - The scissor lift or platform lift, is a mechanical industrial lift that may be modified to be utilized in retail, wholesale, manufacturing and production environments. Industrial scissor lifts have been used predominantly within production and manufacturing facilities for many decades to efficiently raise and lower materials, people and other equipment. The scissor lift is a platform with wheels that operates like a lift truck. It is valuable for duties that require the mobility and speed of transporting individuals and objects into the air.

When fully extended, the scissor lift can reach 6.4 to 18.8 meters or from 21 to 62 feet above ground. It is distinctive in the fact that it does not depend on a straight support to hoist its platform, rather folding supports underneath it come together and stretch the platform upwards. Available with either an electric or hydraulic motor, the scissor lift provides a bumpy ride due to the lift's construction that keeps it from roaming with a continuous velocity. Instead, it travels more rapidly in the middle of its journey and slows down with added extension.

The original scissor lifts were initially built in the 1970's. Great improvements in safety and materials have been made since then, but the fundamental design is still used. A relative to the lift truck, the scissor lift became well-known for its portability and effectiveness, also becoming prevalent as they were the only industrialized platforms that could be effortlessly retracted to fit into the corner of an office. Modern scissor lifts are presently used in practically all areas of production and manufacturing. Used in the construction industry effectively on an irregular terrain and commonly used indoors among warehouses to vehicle repair, these apparatus complete a diverse workload.

Click to Download the pdf

Forklift Parts

Propane Forklift Attachments

Propane Forklift Attachments - Propane lift trucks are one of the most versatile units and more useful compared to lots of other types of lift trucks. They could effectively work in whichever kind of environment, either inside or outside. Unlike fuel powered forklifts, they produce no dangerous gases. As well, propane forklifts are not like the electrically powered kind which...

More

---

Gas Forklift Part

Gas Forklift Parts - The diesel engine was developed during 1893 by Rudolf Diesel. It is an internal combustion engine that uses the heat of compression to be able to burn the fuel and initiate ignition. The fuel is then injected into the combustion chamber. This design is in contrast to spark ignition engines, like gasoline or petrol engines which...

More

---

4 Wheel Drive Forklift Part

4 Wheel Drive Forklift Parts - Pneumatic jacks are known as pallet lift trucks or pump trucks and are broadly used in warehouses and delivery plants to transport materials on pallets. Pneumatic lifts comprises a pair of steel blades mounted on a wheeled counterweight that contains a pump. The pump is used to elevate and lower the forks. Visually inspect...

More

---

Swing Carriage

Swing Carriage - The load capacity of a lift truck jib has a maximum of approximately 1935 lbs to as much as 6000 pounds on either the retracted or extended positions range. You might have to discuss with a material handling specialist about the specific limits of your forklift use. The load capacity rankings are really intended for the jib...

More

---

TCM Forklift Part

TCM Forklift Parts - In the global business of material handling, lift trucks play a major part for transporting industrial goods. First innovated as industrial vehicles during the 1930s in the U.S., forklifts gained recognition after World War II during the 1940s. Becoming a reliable and efficient means to material handling solutions, the practicality and need of these equipment spread...

More

---

Attachments for SVE Trucks

SVE Truck Attachments - Svetruck initiated business in the year 1977 with a clear idea of what particular sort of company they wanted to be and what kind of merchandise they wished to produce. They designed a reliable, durable and service-friendly forklift. Svetruck specializes in producing lift trucks which enable the individual operating it to work efficiently within challenging surroundings....

More

---

Crown Forklift Parts

Crown Forklift Parts - Two brothers Allen A. Dicke and the late Carl H. Dicke established the Crown company in 1945. Carl's son, James F. Dicke joined the family business later on that year. At this time, his son, James F. Dicke II, is Chairman and CEO. James F. Dicke III, serves as the company Head these days, becoming the...

More

---

Pallet Truck Parts

Pallet Truck Parts - Pallet stackers are a style of pallet jack that may be utilized to stack, transfer and lift goods placed on a pallet that are far too tedious for physical lifting. Primarily these mechanisms are utilized to load and unload freight from trucks and to transport pallets from one location to another within a stockroom of stockroom...

More

---