SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklifts
Used Forklift Parts - In time, forklift components will wear and have to be replaced. Purchasing brand new parts could become a costly undertaking so one more idea is to acquire used lift truck components. This can save a lot of money in the long run. It is a good idea to obtain used forklift parts which have been remanufactured. These parts would ensure that you are getting components which will work for a long time and be productive.
Remanufacturing broken and worn out components is a less expensive way overall compared to rebuilding. With rebuilding components, only the parts which are broken or worn out get changed, which means that other wearable components could break down soon after purchase.
Remanufactured components are cleaned after being taken apart and have the unusable components changed. This technique can provide the best assurance for used parts. All wearable components are replaced regardless of age or wear which is another reason why remanufactured parts generally operate so much better. Whichever component within the part is brand new and this provides far longer life to the used part. Depending on the forklift components that are being redone, the cleaning process and the entire remanufacturing process would vary.
The engines are cleaned after a complete disassembly. Different engine parts like for instance rings, pistons, spark plugs, filters, valves, and valve springs can be replaced during the process of remanufacturing. The engines are hot tested after reassembly to guarantee that there are no leaks, no noises, no oil pressure problems or any vacuum.
Transmissions are disassembled, oven cleaned and pressure washed. A comprehensive examination is done to check for any cracks. Bushings, seals and bearings are all replaced. Usually, the replacement parts used on transmission parts meet OEM specifications.
A few forklift components like for instance torque converters, the alternator, the water pump, steer axles and the starter can be quite serviceable after worn parts are replaced. The electronic control in the electric forklift is maintained by the control card. This card can even be remanufactured with replacing all aged and worn out parts. Unlike other forklift components the control card can only have the worn and aged parts replaced.
Remanufactured parts are meticulously checked upon reassembly to guarantee they are in top condition prior to being sold. It is essential when purchasing remanufactured components to be certain they have undergone the proper testing and inspection procedures. On certain larger components like transmissions, steer axles and engines, OEM specification replacement components must be used.
The dealer of used lift trucks and components could guarantee that the remanufactured components have met OEM specifications and that these parts meet industry standards. Many details go into remanufacturing used components. This attention to detail provides more serviceability out of remanufactured parts opposed to the parts that were simply rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Airdrie, Alberta
forkliftpartsairdrie.ca
Email Us
About Us